03:1
With the 4 provided heavy duty zip ties, insert them into the 4 zip tie mounts located on the arch. There are 3 on the vertical beam, and 1 on the lower beam to secure the electronics line.
03:2
Tighten the hose and lines with them inside of the zip tie loop, for the bottom arch zip tie mount do not bundle the electric line and the liquid line. The 2 secure straps on the vertical arch bar are enough to hold the large liquid line in place.
03:3
Finally, trim all the excess zip tie slack. This is it, your lines are now secure and out of your way!